« How to Install Garmin's Map Update 2009: A Step-By-Step Guide | Main | Garmin nuvi 880 Video Review »
|
Own this GPS? Rate It Now!
|

Figure 99: Routing to A Set of Coordinates
Garmin has included the ability to input a set of longitude/latitude coordinates as a destination address. Some locations may not have an official street address and need to be input as a set of coordinates, or this feature can be handy for Geocaching as well.
To route to a set of coordinates, tap Where to? on the Main Menu, and then scroll down to see the Coordinates icon.

Figure 100: Entering the Coordinates
Use the on-screen keypad to input the longitude and latitude coordinates.

Figure 101: Accessing the Tools Menu
It's a little buried in the menu system, but the nuvi 880 can be put into pedestrian mode if you want to use the GPS on foot to walk to a destination. To switch the nuvi into pedestrian mode, tap Tools > Settings > System > Usage Mode > Pedestrian > OK.

Figure 102: Tools Menu
Tap Settings from the Tools Menu

Figure 103: System Settings
Tap System from the Settings Menu

Figure 104: Change the Usage Mode
Tap Automobile to change the "Usage Mode".

Figure 105: Setting the Usage Mode
Nuvi 880 can be set toe Automobile, Bicycle, or Pedestrian mode.
When set to Pedestrian mode, the nuvi 880 will adjust the estimated arrival time accordingly, and allow routing across sidewalks and footpaths that would not be permitted in a vehicle.
NOTE: The nuvi 880 also has the ability to navigate off road, although that option is hidden in a different menu. To use the nuvi 780 in off-road mode, tap Tools > Settings > Navigation > Route Preference > Off Road > OK.

Figure 106: Canceling A Route
Tapping on the Menu button while navigating to an address brings up the Main Menu, shown above. From here, you can stop routing to the destination by tapping on Stop, or detour around a problem area by (such as a traffic jam or closed road) by tapping on Detour.
Including the Stop button right on the Main Menu is a nice feature. I've tested a lot of GPS devices and have found that canceling a route can be a surprisingly difficult task. For example, TomTom's GPS units don't have any way to cancel the route (you can make it appear by switching the TomTom to "Advanced" mode, but under the default menu there's simply no way to cancel the current route).
In my testing I found the detour function worked adequately, although there are no options for how far you want to avoid the current problem, or ability to choose from a list of alternate routes, or exclude specific roads from the trip. But it does provide a quick and easy way to get off the current road if you run into a problem.

Figure 107: Where Am I / Save Current Location Screen
Tapping on the vehicle icon on the map brings up Garmin's updated "Where Am I" screen, shown above in figure 107. This is a great feature that provides one-touch access to your current street address (or closest valid street address), nearest intersection, and exact coordinates.
Garmin's well designed location screen also provides one-touch access to nearby hospitals, police stations, and gas stations.
Tapping Save Location Saving your current location adds the current position to the nuvi's Address Book, and allows you to assign a name the location.

Figure 108: nuvi 880 vs 660 GPS Signal Strength
Garmin has stopped disclosing which GPS receiver it uses in its products, however it's a fairly good bet that the nuvi 880 I tested is using SiRF's high performance StarIII receiver. In a head-to-head test against the SiRF StarIII-equipped nuvi 660, the nuvi 880 achieved identical signal performance.
Throughout the testing process, I was especially interested to see how the nuvi 880's new, slim case design would compare to the older fold-out antenna nuvi 300 and 600 units. Thankfully the nuvi 880 exhibited none of the GPS performance issues that many nuvi 200-series owners have reported. Signal performance on the nuvi 880 also appeared to be better than the 780, consistently achieving identical GPS signal strength to the nuvi 660.